View AP-UM001GD10EG-MH_8257337.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

usb-disk module ap-umxxxxxxxxg-xxxx 1 ? 2009 apacer technology, inc. rev. 1.5 rohs compliant usb-disk module specification april 23, 2009 version 1.5 apacer technology inc. 4 th fl., 75 xintai 5 th rd., sec.1, hsichih, taipei hsien 221, taiwan tel: +886-2-2698-2888 fax: +886-2-2698-2889 www.apacer.com
usb-disk module ap-umxxxxxxxxg-xxxx 2 ? 2009 apacer technology, inc. rev. 1.5 features: usb2.0 high-speed and usb1.1 full- speed compatible interface capacity C 256, 512 mb C 1, 2, 4, 8 gb fast sustained read performance C sustained read: 30 mb/s fast sustained write performance C sustained write: 20 mb/s intelligent usb module C implements dynamic wear-leveling algorithms to substantially increase longevity of flash media C bch (6/12 bit) error detection code/error correction code (edc/ecc) C intrinsic data integrity after power loss C wear leveling algorithm that provides more reliable data storage over an extended period extended data protection (optional) C write protection setting by jumper for prevention of data overwrites. zero power data retention C batteries not required for data storage support ready boost for windows vista support boot-up function for os C windows xp embedded C windows ce C linux C windows xp professional 1 temperature ranges C 0c to 70c for operation (standard) C -40c to 85c for operation (et 2 ) C -40c to 100c for storage low power consumption (typical) C active mode: 110 ma C sleep mode: 450 a connector C 10-pin (2x5) female header rohs compliant 1. please order nr type. only support standard tempera ture 2gb, 4gb, 8gb capacity 2. extended temperature
usb-disk module ap-umxxxxxxxxg-xxxx 3 ? 2009 apacer technology, inc. rev. 1.5 table of contents 1. general description ............................. .................................................4 1.1 performance-optimized controller............... ................................................... ..................................... 4 1.1.1 power management unit (pmu) .................. ................................................... ..............................................4 1.1.2 sram buffer .................................. ................................................... ................................................... .........4 1.1.3 error correction code (ecc) .................. ................................................... ................................................... 4 1.1.4 wear-leveling ................................ ................................................... ................................................... .........4 1.1.5 write protection mode (optional) ............. ................................................... ..................................................4 2. functional block diagram ................................................... ..................5 3. pin assignment.................................. ................................................... .6 3.1 type a, type b, type c, and type e............. ................................................... .................................. 6 3.2 type d v std w ................................................... ................................................... ............................. 7 3.3 type d v lp w ................................................... ................................................... ............................... 8 4. capacity specifications ......................... ...............................................9 4.1 functional specifications...................... ................................................... ............................................ 9 4.2 environmental specifications ................... ................................................... ........................................ 9 5. electrical specification ........................ ..............................................10 6. physical dimension .............................. ...............................................11 6.1 horizontal design .............................. ................................................... ............................................. 11 6.1.1 type a (std 90d)............................ ................................................... ................................................... ....11 6.1.2 type b (std 90d-mh) ......................... ................................................... ................................................... 12 6.1.3 type c (std 90d-ms) ......................... ................................................... ................................................... 13 6.2 vertical design ................................ ................................................... ............................................... 14 6.2.1 type d (std 180d)........................... ................................................... ................................................... ...14 6.3 low profile design............................. ................................................... ............................................. 15 6.3.1 type d (lp 180d) ............................. ................................................... ................................................... ....15 6.3.2 type e (lp 90d-ms) ........................... ................................................... ................................................... ..16 7. product ordering information.................... .........................................17 7.1 product code designation ....................... ................................................... ...................................... 17 7.2 valid combinations............................. ................................................... ............................................ 18 7.2.1 type a (std 90d)............................ ................................................... ................................................... ....18 7.2.2 type b (std 90d-mh) ......................... ................................................... ................................................... 18 7.2.3 type c (std 90d-ms) ......................... ................................................... ................................................... 18 7.2.4 type d (std 180d)........................... ................................................... ................................................... ...19 7.2.5 type d (lp 180d) ............................ ................................................... ................................................... ....19 7.2.6 type e (lp 90d-ms) .......................... ................................................... ................................................... ..19
usb-disk module ap-umxxxxxxxxg-xxxx 4 ? 2009 apacer technology, inc. rev. 1.5 1. general description apacers usb-disk module (udm) is a high performanc e, embedded solid state drive (ssd) designed to replace a conventional ide hard disk drive. udm ssd can be plugged into a standard embedded usb connector commonly found in desktops, portable pc s ystems and industrial pc systems. this product is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective designs, better performance and increased reliability. 1.1 performance-optimized controller the heart of an udm is the usb controller, which tr anslates standard usb signals into the data and controls of the flash media. this proprietary usb c ontroller is specifically designed to attain high d ata throughput from host to flash. 1.1.1 power management unit (pmu) the power management unit (pmu) controls the power consumption of the udm. it can dramatically extend product battery life by leaving the idle par t of the circuitry into sleep mode. the pmu has zer o wake-up latency. 1.1.2 sram buffer the sram buffer is a key contributor to the usb con troller performance. it optimizes data writes to th e flash. 1.1.3 error correction code (ecc) the udm uses bch error detection code (edc) and err or correction code (ecc) algorithms which correct up to 6/12 random single-bit errors for eac h 512-byte block of data depending on spare area of flash memory. high performance is achieved through hardware-based error detection and correction. 1.1.4 wear-leveling flash memory can be erased a limited number of time s, this number is called the erase cycle limit, or write endurance limit, the erase cycle limit applie s to each individual erase block in the flash devic e. in a typical application, and especially if a file system is used, specific pages are constantly updat ed (e.g., the page that contains the fat, registry, etc.). wi thout any special handling, these pages would wear out more rapidly than other pages, reducing the lifetim e of the entire flash. to overcome this inherent deficiency, apacers usb- disk module (udm) uses wear-leveling algorithm. this wear-leveling algorithm ensures that consecuti ve writes of a specific sector are not written phys ically to the same page in the flash. this spreads flash m edia usage evenly across all pages, thereby maximizing flash lifetime. the wear-leveling mechanism provides more than 100, 000 write/erase cycles for reliable data storage over an extended period. 1.1.5 write protection mode (optional) when the device is configured to the write-protecti on mode, it enhances the data security and protecti on. this feature prevents the stored data from inadvert ent system writes or erases, and viruses.
usb-disk module ap-umxxxxxxxxg-xxxx 5 ? 2009 apacer technology, inc. rev. 1.5 2. functional block diagram the usb-disk module (udm) contains a controller, em bedded firmware, and flash media with a female connector. the udm interfaces with the host system allowing data to be written to and read from the flash media. figure 2-1: functional block diagram host usb interface flash management controller flash media flash media
usb-disk module ap-umxxxxxxxxg-xxxx 6 ? 2009 apacer technology, inc. rev. 1.5 3. pin assignment this chapter provides the information on the pin as signments and signal descriptions. 3.1 type a, type b, type c, and type e table 3-1: pin assignment of the 10-pin configuration in type a, type b, type c, and type e pin signal pin signal 1 +5v 2 n.c 3 usb d- 4 n.c 5 usb d+ 6 n.c 7 gnd 8 n.c 9 key (blocked) 10 n.c
usb-disk module ap-umxxxxxxxxg-xxxx 7 ? 2009 apacer technology, inc. rev. 1.5 3.2 type d v vv v std w ww w table 3-2: pin assignment of the 10-pin configuration in type d (std) pin signal pin signal 1 +5v 2 +5v 3 usb d- 4 n.c 5 usb d+ 6 n.c 7 gnd 8 gnd 9 key (blocked) 10 gnd
usb-disk module ap-umxxxxxxxxg-xxxx 8 ? 2009 apacer technology, inc. rev. 1.5 3.3 type d v vv v lp w ww w table 3-3: pin assignment of the 10-pin configuration in type d (lp) pin signal pin signal 1 +5v 2 n.c 3 usb d- 4 n.c 5 usb d+ 6 n.c 7 gnd 8 n.c 9 key (blocked) 10 n.c
usb-disk module ap-umxxxxxxxxg-xxxx 9 ? 2009 apacer technology, inc. rev. 1.5 4. capacity specifications the usb-disk module product family is available as below table matrix. table 4-1: capacity specification density total bytes 256mb 253,739,008 512 mb 511,688,704 1gb 1,027,588,096 2gb 2,059,386,880 4gb 4,118,790,144 8gb 8,237,596,672 4.1 functional specifications table 4-2: performance specifications 4.2 environmental specifications environmental specification of the usb-disk module (udm) product family which follows the mil-std- 810f standards is available as shown in table 4-2. table 4-2: environmental specifications operation 0c to 70c (standard); -40c to 85c (extended temperature) temperature storage -40c to 100c vibration 10 hz to 500 hz, 15g, 3 axes, 30 minutes (iec 68-2- 6) shock duration: 11 ms, 50g, 3 axes, 18 times (iec 68-2-27 ) emc fcc, ce usb 2.0 high-speed (max.) sustained read 30 mb/sec sustained write 20 mb/sec
usb-disk module ap-umxxxxxxxxg-xxxx 10 ? 2009 apacer technology, inc. rev. 1.5 5. electrical specification caution: absolute maximum stress ratings C applied conditions greater than those listed und er absolute maximum stress ratings may cause permane nt damage to the device. this is a stress rating only and functional operation of the device at thes e conditions or conditions greater than those defin ed in the operational sections of this data sheet is not implied. exposure to absolute maximum stress rating conditions may affect device reliability. table 5-1: operating range range ambient temperature voltage standard 0c to 70c extended temperature -40c to 85c 4.5-5.5v table 5-2: absolute maximum power pin stress ratings parameter symbol min max unit power supply input v dd -0.3 5.5 v voltage on any pin except vdd with respect to gnd v in -0.3 5.8 v
usb-disk module ap-umxxxxxxxxg-xxxx 11 ? 2009 apacer technology, inc. rev. 1.5 6. physical dimension 6.1 horizontal design 6.1.1 type a (std 90d) standard 90 degree length 28.8 mm width 26.65 mm height (max) 10.5 mm unit: mm tolerance: 0.2
usb-disk module ap-umxxxxxxxxg-xxxx 12 ? 2009 apacer technology, inc. rev. 1.5 6.1.2 type b (std 90d-mh) standard 90 degree mounting header length 37.8 mm width 26.65 mm height (max) 10.5 mm unit: mm tolerance: 0.2
usb-disk module ap-umxxxxxxxxg-xxxx 13 ? 2009 apacer technology, inc. rev. 1.5 6.1.3 type c (std 90d-ms) standard 90 degree mounting screw length 37.8 mm width 26.65 mm height (max) 10.5 mm unit: mm tolerance: 0.2
usb-disk module ap-umxxxxxxxxg-xxxx 14 ? 2009 apacer technology, inc. rev. 1.5 6.2 vertical design 6.2.1 type d (std 180d) standard 180 degree length 37.3 mm width 26.65 mm height (max) 8.5 mm unit: mm tolerance: 0.2
usb-disk module ap-umxxxxxxxxg-xxxx 15 ? 2009 apacer technology, inc. rev. 1.5 6.3 low profile design 6.3.1 type d (lp 180d) low profile 180 degree length 31.95 mm width 24 mm height (max) 5 mm unit: mm tolerance: 0.2
usb-disk module ap-umxxxxxxxxg-xxxx 16 ? 2009 apacer technology, inc. rev. 1.5 6.3.2 type e (lp 90d-ms) low profile 90 degree mounting screw length 36.8 mm width 26.5 mm height (max) 7.5 mm unit: mm tolerance: 0.2 write protect read/write
usb-disk module ap-umxxxxxxxxg-xxxx 17 ? 2009 apacer technology, inc. rev. 1.5 7. product ordering information 7.1 product code designation ap C u m xxxx x x x x g C xx xx model name apacer product code capacity 256m = 256mb 512m = 512mb 001g = 1gb 002g = 2gb 004g = 4gb 008g = 8gb solution version diemension 1 = 90d std 2 = 180d std 3 = 90d low profile 4 = 180d low profile pcb version temperature: c: commercial temperature e: extended temperature rohs compliant mh: mounting header ms: mounting screw option: rb: ready boost wp: write protection nr: non-removable
usb-disk module ap-umxxxxxxxxg-xxxx 18 ? 2009 apacer technology, inc. rev. 1.5 7.2 valid combinations 7.2.1 type a (std 90d) standard 90 degree capacity standard extended temperature 256mb ap-um256me10cg ap-um256md10eg 512mb ap-um512me10cg ap-um512md10eg 1gb ap-um001ge10cg ap-um001gd10eg 2gb ap-um002ge10cg ap-um002gd10eg 4gb ap-um004ge10cg ap-um004gd10eg 8gb ap-um008ge10cg ap-um008gd10eg 7.2.2 type b (std 90d-mh) standard 90 degree mounting header capacity standard extended temperature 256mb ap-um256me10cg-mh ap-um256md10eg-mh 512mb ap-um512me10cg-mh ap-um512md10eg-mh 1gb ap-um001ge10cg-mh AP-UM001GD10EG-MH 2gb ap-um002ge10cg-mh ap-um002gd10eg-mh 4gb ap-um004ge10cg-mh ap-um004gd10eg-mh 8gb ap-um008ge10cg-mh ap-um008gd10eg-mh 7.2.3 type c (std 90d-ms) standard 90 degree mounting screw capacity standard extended temperature 256mb ap-um256me10cg-ms ap-um256md10eg-ms 512mb ap-um512me10cg-ms ap-um512md10eg-ms 1gb ap-um001ge10cg-ms ap-um001gd10eg-ms 2gb ap-um002ge10cg-ms ap-um002gd10eg-ms 4gb ap-um004ge10cg-ms ap-um004gd10eg-ms 8gb ap-um008ge10cg-ms ap-um008gd10eg-ms
usb-disk module ap-umxxxxxxxxg-xxxx 19 ? 2009 apacer technology, inc. rev. 1.5 7.2.4 type d (std 180d) standard 180 degree capacity standard extended temperature 256mb ap-um256me20cg ap-um256md20eg 512mb ap-um512me20cg ap-um512md20eg 1gb ap-um001ge20cg ap-um001gd20eg 2gb ap-um002ge20cg ap-um002gd20eg 4gb ap-um004ge20cg ap-um004gd20eg 8gb ap-um008ge20cg ap-um008gd20eg 7.2.5 type d (lp 180d) low profile 180 degree capacity standard extended temperature 256mb ap-um256me40cg ap-um256md40eg 512mb ap-um512me40cg ap-um512md40eg 1gb ap-um001ge40cg ap-um001gd40eg 2gb ap-um002ge40cg ap-um002gd40eg 4gb ap-um004ge40cg ap-um004gd40eg 8gb ap-um008ge40cg ap-um008gd40eg 7.2.6 type e (lp 90d-ms) low profile 90 degree mounting screw capacity standard extended temperature 256mb ap-um256me31cg-ms ap-um256md31eg-ms 512mb ap-um512me31cg-ms ap-um512md31eg-ms 1gb ap-um001ge31cg-ms ap-um001gd31eg-ms 2gb ap-um002ge31cg-ms ap-um002gd31eg-ms 4gb ap-um004ge31cg-ms ap-um004gd31eg-ms 8gb ap-um008ge31cg-ms ap-um008gd31eg-ms note: valid combinations are those products in mass produ ction or will be in mass production. consult your apacer sales representative to confirm availab ility of valid combinations and to determine availa bility of new combinations.
usb-disk module ap-umxxxxxxxxg-xxxx 20 ? 2009 apacer technology, inc. rev. 1.5 revision history revision description date 1.0 official release may 5, 2008 1.1 product ordering information updated september 30, 2008 1.2 pin assignment updated december 17, 2008 1.3 type e dimension & ecc capability updated march 18, 2009 1.4 feature context & product ordering information updated april 21, 2009 1.5 type d (lp 180d) drawing updated april 23, 2009
usb-disk module ap-umxxxxxxxxg-xxxx 21 ? 2009 apacer technology, inc. rev. 1.5 global presence taiwan (headquarters) apacer technology inc. 4 th fl., 75 xintai 5 th rd., sec.1 hsichih, taipei hsien 221 taiwan, r.o.c. tel: +886-2-2698-2888 fax: +886-2-2698-2889 amtsales@apacer.com u.s.a. apacer memory america, inc. 386 fairview way, suite102, milpitas, ca 95035 tel: 1-408-586-1291 fax: 1-408-935-9611 sa@apacerus.com japan apacer technology corp. 5f, matsura bldg., shiba, minato-ku tokyo, 105-0014, japan tel: 81-3-5419-2668 fax: 81-3-5419-0018 jpservices@apacer.com europe apacer technology b.v. europalaan 89 5232 bc 's-hertogenbosch the netherlands tel: 31-73-645-9620 fax: 31-73-645-9629 sales@apacer.nl china apacer electronic (shanghai) co., ltd 1301, no.251,xiaomuqiao road, shanghai, 200032, china tel: 86-21-5529-0222 fax: 86-21-5206-6939 sales@apacer.com.cn india apacer technologies pvt. ltd. #143, 1st floor, raheja arcade, 5th block kormangala industrial layout, bangalore - 560095, india tel: 91-80-4152-9061 sales_india@apacer.com
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: apacer: ? AP-UM001GD10EG-MH? ap-um001gd10eg-ms? ap-um001gd31eg-ms? ap-um002gd10eg-mh? ap- um002gd31eg-ms? ap-um004gd10eg-mh? ap-um004gd10eg-ms? ap-um004gd31eg-ms? ap-um008gd10eg- mh? ap-um008gd10eg-ms? ap-um008gd31eg-ms? ap-um256md10eg-mh? ap-um256md10eg-ms? ap- um256md31eg-ms? ap-um512md10eg-mh? ap-um512md10eg-ms? ap-um512md31eg-ms

▲Up To Search▲

Price & Availability of AP-UM001GD10EG-MH

	To Download AP-UM001GD10EG-MH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .